DX 460 Programme |
|
|
DX 460 Programme |
|
DX460 MX72 powder-actuated tool with magazine
| Ordering designation | Item no. |  |
| DX 460 MX72 powder-actuated tool with magazine MX 72 | 000000/0 | |
| Supplied in an impact-resistant plastic toolbox, cleaning set, spare buffer, ear protectors, safety goggles Hilti lubricant spray and operating instruction. |
DX460 powder-actuated tool
| Ordering designation | Item no. |  |
| DX 460 powder-actuated tool | 000000/0 | |
| Supplied in an impact-resistant plastic toolbox, cleaning set, spare buffer, ear protectors, safety goggles Hilti lubricant spray and operating instruction. |
Cartridges (strips of 10)
| Power | Package contents | Ordering designation | Item no. |
| Light | 1000 | 6.8/11 M green | 000000/0 |
| Medium | 1000 | 6.8/11 M yellow | 000000/0 |
| Heavy | 1000 | 6.8/11 M red | 000000/0 |
| Extra-heavy | 1000 | 6.8/11 M black | 000000/0 |
Accessories DX460
| Description | Ordering designation | Item no. | |
| Magazine |  |
||
| for magazined nails up to 72mm | MX72 | 370844/3 | |
| Fastener guide | |||
| Standard | X-460-F8 | 373313/6 | |
| for improved accessibility, 15mm narrow | X-460-F8N15 | 373314/4 | |
| for improved accessibility, 10mm narrow | X-460-F8N10 | 373315/1 | |
| for fasteners with a 12mm steel washer | X-460-F8S12 | 373317/7 | |
| with stop spall for fastening 6 and 8mm threaded studs | X-460-F8SS | 373318/5 | |
| for 10mm threaded studs | X-460-F10 | 373319/3 | |
| with stop spall for fastening 10mm threaded studs | X-460-F10SS | 373320/1 | |
| for fastening X-IE insulation fasteners | X-460-FIE | 373321/9 | |
| Piston |  |
||
| Standard, for X-DNI, X-EDNI, X-ZF, X-FS,
X-CR X-DAK nails, 6 and 8mm threaded studs |
X-460-P8 | 373297/1 | |
| for X-AL-H nails | X-460-P8AL | 373299/7 | |
| when overdriving nails into wood is desired | X-460-P8W | 373298/9 | |
| for 10mm threaded studs and nails | X-460-P10 | 373300/3 | |
| for X-IE insulation fasteners | X-460-PIE | 373301/1 | |
| for X-IE insulation fasteners with approval | X-460-PIEA | 373302/9 | |
| Stabilizer | |||
| assists perpendicular tool position | X-460-STAB | 373322/7 | |
| Washer holder | 
|
||
| for fastening 23/36mm steel washers with magazine | X-460-WH23/36 | 373331/8 | |
| Pole Tool | |||
| Extension 5ft (1.5m) | X-PT 460 5ft | 370830/2 | |
| Extension 5ft (2.1m) | X-PT 460 7ft | 371661/0 | |
| Receptacle | X-PT 460 | 371663/6 | |
| Cleaning Kit | |||
| 3 brushes, ramrod, scraper, cleaning cloth | X-460-Clean | 372810/2 |
Information subject to change without notice. Please obtain certified information from vender.
